Flotation machine must have the function

In the dressing process floating, the floating concentrator is substantially a floating device to implement a mineral beneficiation separated. Float mining machines, like ordinary machines, must meet the special needs of the flotation process in addition to ensuring reliable, wear-resistant, energy-saving, low-cost and easy to manufacture. Therefore, the following basic requirements are imposed on the flotation separator.

(1) Good aeration. The flotation machine must ensure that the slurry absorbs a sufficient amount of air (some flotation machines are external pressure fans pressed into the air) and try to disperse the entire tank because the air is dispersed more evenly. The more opportunities for the particles to contact the bubbles, the higher the efficiency of the flotation.

(2) Stirring The flotation separator should ensure a good agitation of the pulp, so that the ore is not suspended and suspended, and can be evenly distributed in the tank, while promoting the dissolution of some poorly soluble chemicals. Conducive to the full role of pharmaceuticals and minerals.

(3) Circulating flow The circulating flow of pulp in the floating concentrator can increase the chance of contact between the mineral material and the bubble.

(4) It can adjust the slurry surface and can work continuously in the floating beneficiation process. Sometimes it is necessary to adjust the thickness of the foam layer and the slurry flow rate, and in the production, the discharge from the ore to the floating concentrate and tailings is continuous. The process that is carried out.

According to the above requirements, no matter which flotation machine has the following basic components:

a tank body having a feed hole and a discharge hole, and a gate device for adjusting the surface of the ore;

2 inflatable device;

3 stirring device;

4 Discharge the mineralized foam device.