Engine Oil and Diesel Dual Pump

Model NO.: YB-72
Power: 1100W
Head: 5~10m
Sucking Lift: 3~5m
Inlet/Outlet: G1"
Trademark: YB
Transport Package: Five Layer Corrugated Carton Box
Specification: 72LPM
Origin: China
HS Code: 8413110000
Model NO.: YB-72
Power: 1100W
Head: 5~10m
Sucking Lift: 3~5m
Inlet/Outlet: G1"
Trademark: YB
Transport Package: Five Layer Corrugated Carton Box
Specification: 72LPM
Origin: China
HS Code: 8413110000
 

This AC big flow rate pump is fueling the diesel,kerosene,not for gasoline.And its pump head with iron material,and with 100% copper line,its specification as follows:

 

 1.With CE certification,and IP54 Protection;

 2.Pump with Bypass and Self priming;

 3.Filter or Check valve


 

Engine Oil and Diesel Dual Pump
   

This AC big flow rate pump is fueling the diesel,kerosene,not for gasoline.And its pump head with iron material,and with 100% copper line,its specification as follows:

 

 1.With CE certification,and IP54 Protection;

 2.Pump with Bypass and Self priming;

 3.Filter or Check valve


 

Engine Oil and Diesel Dual Pump
 

Vertical Impact Crusher

There are two types of vertical axis impact crushers. One is the rock impact metal crusher, where the material is thrown onto the jaw plate inside the crusher shell. The other is that the crusher has a crushing chamber that forms the shell. The rock can accumulate in the shell at its natural resting angle, and the material impacts the rock layer at a great speed, causing it to undergo some degree of fragmentation. After the rock is thrown onto an inclined plane, it deflects upwards to the upper part of the crushing chamber, thus shifting downwards. Then, the rock curtain continuously ejected from the rotor and subjected to secondary crushing is called a rock impact rock crusher.

In a vertical impact crusher, the circumferential speed of the rotor can reach up to 99m/s, and materials with very small particle sizes fed into the crusher will also be effectively crushed. It does not have an impact hammer and has minimal metal wear. The particle size of the feed is generally less than 60 millimeters. It can be used to crush hard abrasive materials, selectively crush soft and hard materials, and has drying performance. It can replace rod mills through mixed metals.

Vertical Impact Crusher,Vertical Impact Ore Crusher,Vertical Shaft Impact Crusher

SiChuan TieYing Machinery Manufacturing CO.,LTD; , https://www.tieyingcrushers.com