Do not try to repair any sidewall puncture.
Excavator Main Valve
Excavator Main Valve
Including Hydraulic Main Relief Valve,
PPC Valve , Unloading Valve , Safety Oil
Suction Valve , By-pass Valve , Combined
Shunt Valve .
1. Excavator
Main Valve Parts number and List For
Komatsu Excavators
709-70-51200
PC120-5/PC200-3
709-40-50100
PC200-6(6D95)
723-40-51102
PC200-6(6D102)/PC200-7
723-40-91102
PC200-6(6D102)/PC200-7
723-40-50401
PC200-6(6D102)
723-40-56302
PC200-6(6D102)
723-40-56100
PC200-6(6D95)
723-40-56900
PC200-7
723-30-90101
PC120-6
723-30-50101
PC120-6
4372038
EX200-5/ZX200/SH240
420-00257
EX200-5/ZX200/SH240
723-30-56100
PC120-6
723-50-55100
PC120-6
702-73-01520
PC120-6
723-20-61101
PC60-7/PC75/PC78
2420-1225A
SH120/SH200A3/HD820/EC210
21113-50306
SH300/HD1250/HD1430
708-2L-24122
PC200-6
723-40-90200
PC200-6/PC300-6/PC400-6
723-40-90101
PC200-6/PC300-6/PC400-6
708-25-04311
PC200-5
6E-5933
E320
6E-1915
E320
6E-2914
E320
723-46-43200
PC200/300-6
723-46-44100
PC300/PC400-6
159-7732
E320B/E320C/E320D
4372034
control valve
723-46-48100
serivce valve
4242176
EX200-2
2. Excavator Main Valve Manufactures
For Caterpillar, Komatsu
, Hitachi ,Deawoo , Hyundai , Kobelco , Samsung , Sumitomo , Volvo,
Bobcat, Case, Airman, Doosan, IHI, JCB, John Deer, Komatsu, Kubota, Kobelco, Mitsubishi, Yanmar, Thomas, TEREX,
Takeuchi , Sumitomo Excavators
3. Excavator Main Valve Brand
Kawasaki Hydraulic
Final Main Valve
Kabaya Kyb Hydraulic
MainValve
Bosch Rexroth Hydraulic Main Valve
KPM Hydraulic Main
Valve
KPM Main Valve
KMX15RA /B45017C For Excavators made in Janpan
Excavator Main Valve Excavator Main Valve,Main Control Valve Excavator,Hyundai Excavator Parts,Control Valve Excavator Jining Kunpeng Construction Machinery Equipment Co., Ltd , https://www.excavatorenginepart.com
Products Detail
Type:
Tire Repair Kit for Bicycle
Item Number:
CC1411
Material:
PP,Rubber
Size:
Standard
MOQ:
5,000pcs
Logo:
Customized
Color:
Usually,black
Usage:
For repair bicycle tire
Sample Time:
3-5days
Production Time:
35days after deposit
Payment Term:
T/T,L/C,D/P,WESTERN UNION
Why choose us?
 1. The first step is to locate the offending foreign object in your tire.
  2. Remove the Object
  3. Put 2-3 drops of the rubber cement on the tip of the reamer and insert the reamer into the puncture. Work the reamer in and   out while twisting to clean and prep the puncture and apply the cement. This process will also enlarge the hole to that the           plug will fit through; because of this the first couple of insertions can be difficult. Repeat this process 2-3 times to make sure t     the puncture is clean and that there is enough cement in the wound.Â
4. Take each end of the repair string(about 70mm long), this is the plug, and roll the center of the string into the needle eye.       Apply 2-3 drops of rubber cement to the end of the needle andÂ
Push the needle and repair string into the puncture (this can be tricky with smaller punctures) until only about a quarter-inch of the strip is sticking out of the tire's surface.
 5. Make a 1/4 turn with the  handle and pull the needle probe out of the tire. The patch should remain in the tire when you remove the probe.Trim the repair strip that is sticking out of the tire down to about 1/8 of an inch.
6.Use an air compressor to replace any air that may have leaked out of the tire. Your tire should be re-inflated and ready to get back onto the road.
Notice
Please note that this repair kit should not be used to fix tyres with punctures bigger than 1/4'' and should only be used as temporary safely. Then you can repair your tire permanently.
Contact us
Ningbo Super Clean Co.,Ltd.
ADD: No.1, HouCang Industry Zone,
        West Section Yinxian Road, Ningbo China(315153)
TEL:0086-574-89020080,89020081
FAX:0086-574-88255300
Mobile:0086-13858225192
www.nbsuperclean.com
Â
Â
Â
Excavator parts: Excavator Engine Part, Excavator Undercarriage Parts, Excavator Final Drive, Excavator main valve, Excavator Hydraulic Pump.