In the laboratory, solid samples are usually pre-processed before testing and analysis. In the pre-processing step, crushing and grinding is a very important part. If the grinding is not thorough, the data of later testing may also be possible. Inaccurate. Therefore, it is necessary to select a suitable laboratory pulverizer to crush the samples.
An
inflatable camping tent is a type of tent that is designed to be inflated using
an air pump instead of traditional tent poles. The inflatable camping tents are
made of lightweight, waterproof fabrics, and are supported by tubes or frames. An inflatable camping tent is
a great option for families or small parties who want an easy and quick setup. They typically
have one or more doors and windows for ventilation, and may also include
features such as vestibules, awnings, and mesh panels. They can accommodate one
or more people, depending on their size and design, and are an essential piece
of camping equipment for any outdoor adventurer. This type of tent
is easy to set up and take down, and is ideal for camping trips where space and
weight are important factors. The tent can be inflated and deflated quickly,
making it ideal for use in areas where the weather can change rapidly.
Inflatable camping tents are available in a variety of sizes and styles, from
small one-person tents to large family-sized tents.
Inflatable Camping Tent,Inflatable Party Tents,Field Tents For Camping,Pvc Inflatable Sofa For Outdoor Relaxing Yangzhou Canway Outdoor Equipment Co.,Ltd , https://www.yzcanway.com
The FS-II laboratory pulverizer developed by Top Yunnong is suitable for preparing crushed samples in the laboratory. It can efficiently and quickly crush wheat, corn, rice, mung beans, soybeans and other items. The crushed samples are in line with aging grain testing and wheat The pre-processing requirements of whole wheat flour gluten determination.
The working principle and design features of the laboratory pulverizer: It uses the high-speed rotation of the working impeller (10,000 revolutions per minute) and the high-speed airflow formed by it to make the processed materials hit the grinding cavity at high speed, roll and rub against the grinding belt. The particle size of the processed product can be changed according to the needs. The machine is equipped with 60 mesh and 80 mesh per inch. After the material accelerated by the impeller interacts with the grinding belt, the particles pass through the sieve and enter the sample through the settling cylinder. The above process is only completed within 2-3 seconds. When the particle size of the material in the sample bottle cannot fully meet the needs, the screen can be replaced and then sent to the hopper for addition. When processing materials with low particle size requirements, the screen can be removed to increase the feed rate to increase productivity. During the processing, the heat generated by high-speed moving materials and friction can raise the temperature of the grinding chamber to about 30°C-35°C. This heat will be transferred from the aluminum alloy parts with good thermal conductivity to the surrounding medium (air). The heat generated by the motor and transmission is absorbed by the air entering at the bottom of the casing and discharged from the exhaust port at the rear of the base. The shock-absorbing pads of the base and the shell and the sound-absorbing layer in the shell are used to improve the working environment.