PTA Powder
Main application:Repair and
strengthen workpiece surface, significantly
Welding method:PTA welding
Main equipment:PTA welding
machine
Flame core temperature: about 10000℃
Technological characteristics:PTA has high
temperature, concentrated energy, stable combustion, small heat affected zone,
fast welding speed, high production efficiency, easy to obtain low dilution
rate of surfacing layer, surfacing layer and workpiece matrix are metallurgical
bonding,, bonding strength is high.
PTA welding technology is one of surface
strengthening methods, which has high deposition rate, low dilution rate, and
could be applied with many kinds of powder. The manufacturing craft of PTA
powder is normally gas atomization, which reduces satellite of powder. We
supply 4 main categories of PTA powder: Nickel-based alloy powder, Iron-based
alloy powder, Cobalt-based alloy powder and Mixed Powder.
Nickel Based Alloy Powder possesses high
temperature resistance and wear resistance, it is the most popular alloy powder
applied by PTA welding both domestically and internationally. Coating hardness
is within the range of HRC 30-60. It could be applied to various industries
like agriculture, plastic, paper, marine and steel making where wear and
corrosion protection needed. Some examples are plunger, moulds, pump leaf and
screw.
Iron Based Alloy Powder is more widely used
and a more economic choice. With high abrasive resistance, it is more commonly
applied to mining tools, drilling tools and mixers of iron and steel making
industry, coal industry, shaft, oil and energy industry.
Cobalt Based Alloy Powder is recommended
for corrosion and oxidation resistance, with better hot hardness values than
equivalent Nickel based alloy powder. It is widely applied to steel making
industry, coal industry and mining industry.
Mixed powder mainly refers to NiCrBSi
mixing with other hard-phase powder such as cast tungsten carbide and other cemented
alloy powder, which allows the powder better hardness around HRC60 and
excellent abrasion resistance.
Mixed powder is more often used for mining
equipment for oil sands, lignite, oil drilling tools, excavator buckets,
extrusion screws for plastic processing, grain and oil processing, etc.
PTA Powder,Iron Based Alloy Powder,Cobalt Based Alloy Powder,Nickel Based Alloy Powder Luoyang Golden Egret Geotools Co., Ltd , https://www.lyshieldcutters.com
Model
Frequency
(Hz)
Power
(KW)
Voltage
(V)
Current
(A)
Max
Airflow
(m³/h)
Max
Vacuum
(mbar)
Max
Compressor
 (mbar)
Noise
(dB)
N.W.
(kg)
2LG810-7AH27
50
7.5
345-415â–³
600-720Y
16.7/9.6
530
-320
430
70
66
60
8.6
380-480â–³
660-720Y
17.3/10
620
-350
400
74
1. Adopt SKF & NSK bearing.
2. Use ADC12 aluminum alloy material.(same to BMW's wheel hubs)
3. Random installation( vertical or horizontal)
4. Insulation class: F, Protection class: IP54
5. 100% oil free air delivery ( Impeller connected to the motor directly, without any oil lubricating)Â
6. No routine maintenance (whithout wheel gear and belt,don't need to do maintenance towards those parts)
7. Quiet operation, low noise(adopt low noise motor, meanwhile inlay muffler is available if lower noise required)
8.Variable output control(pressure or vacuum)
9.Pulsation-free compression(use quakeproof footstand)
10.Long term durability(24H running)
11.Strictly tested before leaving the factory
Applications :Â
1. Aquaculture (fish and prawn pond aeration)
2. Waste water treatment, sewage treatment system.
3. Pneumatic conveying systems.
4. Lifting and holding of parts by vacuum.
5. Packing machines.
6. Filling of bags/bottles/hoppers.
7. Soil remediation
8. Food processing.
9. Laser printers
10. Dental suction equipment.
11. Paper processing.
12. Gas analysis.
Our service:
 Marketing Service
100% tested CE certified blowers.Special customized blowers(ATEX blower,belt-driven blower)Â for special industry.Like gas transportation,Medical industry...Professional advice for model selection and further market development.
After-sale Service
Experienced suggestion for blower installation and use.12 months warranty.Long-term technical support.
FAQs:
Q: Can water be pumped through my blower?
A:Â No, clean dry air only
Q: My blower is leaking around the cover is this normal?
A: Normal goorui blowers are not leak-free designed,but if you care a lot about the leaking,then you can contact us for a leak proof one(special customized).
Q: What kind of oil do I need for my blower?
A:Â All our goorui blowers are oil-free and maintenance-free designed.
Q: Can I pump combustible gas through my blower?
A: Normally,if you'd like to use blower for combustible gas conveying,we suggest to choose our explosion proof ATEX blower(special customized) .
Q: Are the foam pieces inside my blower for filtration?
A:Â No, they are not for filtration. They are designed for sound reduction, an inlet filter should be sourced separately.
Q: What will be the consequences if I don't use a relief valve on my blower?
A:Â The blower may get overheat, and may cause thermal expansion of internal parts, which will do harm to the impeller and Bearing.
China Product Vortex Wind Pump for Food Fermentation Equipment
Model
Frequency
(Hz)
Power
(KW)
Voltage
(V)
Current
(A)
Max
Airflow
(m³/h)
Max
Vacuum
(mbar)
Max
Compressor
 (mbar)
Noise
(dB)
N.W.
(kg)
2LG810-7AH27
50
7.5
345-415â–³
600-720Y
16.7/9.6
530
-320
430
70
66
60
8.6
380-480â–³
660-720Y
17.3/10
620
-350
400
74
1. Adopt SKF & NSK bearing.
2. Use ADC12 aluminum alloy material.(same to BMW's wheel hubs)
3. Random installation( vertical or horizontal)
4. Insulation class: F, Protection class: IP54
5. 100% oil free air delivery ( Impeller connected to the motor directly, without any oil lubricating)Â
6. No routine maintenance (whithout wheel gear and belt,don't need to do maintenance towards those parts)
7. Quiet operation, low noise(adopt low noise motor, meanwhile inlay muffler is available if lower noise required)
8.Variable output control(pressure or vacuum)
9.Pulsation-free compression(use quakeproof footstand)
10.Long term durability(24H running)
11.Strictly tested before leaving the factory
Applications :Â
1. Aquaculture (fish and prawn pond aeration)
2. Waste water treatment, sewage treatment system.
3. Pneumatic conveying systems.
4. Lifting and holding of parts by vacuum.
5. Packing machines.
6. Filling of bags/bottles/hoppers.
7. Soil remediation
8. Food processing.
9. Laser printers
10. Dental suction equipment.
11. Paper processing.
12. Gas analysis.
Our service:
 Marketing Service
100% tested CE certified blowers.Special customized blowers(ATEX blower,belt-driven blower)Â for special industry.Like gas transportation,Medical industry...Professional advice for model selection and further market development.
After-sale Service
Experienced suggestion for blower installation and use.12 months warranty.Long-term technical support.
FAQs:
Q: Can water be pumped through my blower?
A:Â No, clean dry air only
Q: My blower is leaking around the cover is this normal?
A: Normal goorui blowers are not leak-free designed,but if you care a lot about the leaking,then you can contact us for a leak proof one(special customized).
Q: What kind of oil do I need for my blower?
A:Â All our goorui blowers are oil-free and maintenance-free designed.
Q: Can I pump combustible gas through my blower?
A: Normally,if you'd like to use blower for combustible gas conveying,we suggest to choose our explosion proof ATEX blower(special customized) .
Q: Are the foam pieces inside my blower for filtration?
A:Â No, they are not for filtration. They are designed for sound reduction, an inlet filter should be sourced separately.
Q: What will be the consequences if I don't use a relief valve on my blower?
A:Â The blower may get overheat, and may cause thermal expansion of internal parts, which will do harm to the impeller and Bearing.
China Product Vortex Wind Pump for Food Fermentation Equipment
Model NO.: 2LG810-7AH27
Frequency: 50 Hz/ 60Hz
Rated Output: 7.5kw
Voltage: 200-480V
Max Airflow: 530m3h
Max Compressor: 430mbar
Weight: 66kg
Phase: Three Phase
Structure/Pressure: Single-Stage & High Pressure
Material: Aluminme Alloy
Usage: for Manufacture
Trademark: Liongoal
Transport Package: Carton or Wooden Case
Specification: high pressure blower
Origin: China
Model NO.: 2LG810-7AH27
Frequency: 50 Hz/ 60Hz
Rated Output: 7.5kw
Voltage: 200-480V
Max Airflow: 530m3h
Max Compressor: 430mbar
Weight: 66kg
Phase: Three Phase
Structure/Pressure: Single-Stage & High Pressure
Material: Aluminme Alloy
Usage: for Manufacture
Trademark: Liongoal
Transport Package: Carton or Wooden Case
Specification: high pressure blower
Origin: China
China Product Vortex Wind Pump for Food Fermentation Equipment