In recent years, the operational difficulties of the machinery industry have increased significantly, and the pressure to change the growth mode has also been increasing. However, under the influence of the market forcing mechanism, industry restructuring and transformation and upgrading are gradually accelerating.
QUANTUM specialize in the design, manufacture and supply of a range of mixers best suited to your specific mixing and material characteristics.
Whether your application is batch mixing or continuous mixing, major, minor and micro additives, liquid to solid, solid to liquid, or liquid additives or de-lumping during mixing, QUANTUM has vast experience - over 30 years in building mixers to assist you in your suitable mixer selection.
QUANTUM Standard Range of Mixers:
Batch Mixing:
• Ribbon Blender
• Paddle Mixers.
• Z arm Mixers
• Plough shear
• Continuous mixing:
• Twin Pug Mixers
• Twin ribbon mixers
Conditioning and High Shear Mixing:
• Plough Shear Mixer. (U trough or Tubular design)
QUANTUM provide the latest technology to offer our customers the greatest possible saving in production and performance.
We can provide complete turnkey mixing plants including batch mixing, loading and un-loading systems, product de lumping during mixing or gentle mixing action for friable products.
Mixing Criteria for Selection of Mixer
The type of mixer is dependent on many factors some are as follows but these are not limited to the following:
• Production requirements: Batch or Continuous.
• Capacity throughput
• Characteristics and nature of product, additives and mixed material characteristics and flow ability.
• Uniformity of mix and additives.
• Quantity and percentage of Major, Minor and Micro ingredients
• Powder to liquid or liquid to solid mixing requirements.
• Does the material form lumps during mixing or require conditioning
• Clean down and contamination/ Clean down and sanitary requirements.
• Selection of suitable end seal for specific materials is very important.
• Heating or Cooling.
QUANTUM Paddle Mixers
The QUANTUM Paddle Mixer is unsurpassed for its FAST, THOROUGH BLENDING. Curved, adjustable paddle blades combine a scooping and lifting action with a unique [criss-cross" blending pattern to assure a complete uniform blend for partial batches as well as full batches.
Unlike conventional Ribbon Blenders, which tend to be slow and do not allow for blending of partial batches.
Thorough Clean-Out and Positive Discharge, this is achieved with the paddle blades being curved to conform to the contour of the mixing chamber and installed to allow a close tolerance with the mixer shell. This close tolerance assures a thorough clean-out of the chamber and a positive discharge.
QUANTUM Mixers are of heavy duty construction, giving long life and trouble free performance.
An innovative [WHIZZER" can be installed on any paddle or any plough-type fluid bed mixer to provide capabilities to de-lump, pulverise, grind, finish, blend, fiberise or intensively agitate.
QUANTUM Z-Arm Mixers
QUANTUM Z-Arm Mixers are designed for fast, reliable mixing of products for the food industry. Our mixers are successfully operating and mixing ingredients for confectionery through to cereal products.
The Z-Arms Mixers have the following features:
• Z-Arms cast from stainless steel in one piece
• Mixers can be polished to suit your requirements
• The shafts seals can be quick knock down sanitary type
• The mixer bowls are heavy duty, with continuous polished welds
• The mixer bowl can be tilted for fast and complete emptying
QUANTUM Pug Mixers
QUANTUM Pug Mixers are suitable for a wide range of industries from clay and bricks through to mineral extraction processes. Pug mixers are used for applications requiring continuous flows with difficult to handle sticky products. QUANTUM have designed mixers with highly abrasive and corrosive products. Different materials of construction can be mild steel, stainless steel through to exotic alloys such as Alloy 600 and Hastelloy.
Our Pug Mixers can be supplied with different options such as:
• Heating or cooling jackets
• Liquid injection nozzles
• Wear liners
• Adjustable mixer paddles to control throughput and retention time
Industrial Mixer,Rotary Ribbon Mixer,Sigma Blade Blender,Industrial Mixer Grinder Quantum Conveying Systems Yangzhou Co.,Ltd. , https://www.ycectech.com
From the comparison of the year-on-year growth rate of main business income and profits in the first three quarters, it can be clearly seen that the industries with close relationships with consumption, informatization, and automation are developing faster than the typical investment products industry. It can be seen from this that the automotive industry with the largest proportion of total volume grows faster this year, which is the main industry that boosts the growth rate of the machinery industry; the growth rates of sub-sectors such as agricultural machinery, instrumentation, and basic components are also higher than the average growth of the machinery industry. speed.
Correspondingly, the typical investment product industries (such as construction machinery, machine tools, heavy machinery, power generation equipment, etc.) are generally in poor conditions; in some of these industries, output does not necessarily fall, but main business revenues decline and profits decline. It is even more obvious that "there is no shortage of living, and the efficiency has fallen sharply." The reason for this is that the expansion of production capacity in these industries has been severely excessive. Once the market has cooled down, competition has become more intense and product prices have plummeted, leading to a substantial decline in efficiency. "Compared to the decline in the amount of machine orders and sales revenue, the decline in corporate profits is the reason that makes them more uneasy." Luo Baihui, chief analyst of Jinmo Machine Tool Network, said that from the machine tool industry analysis, the low-end machine tool market profits are meager Indisputable facts, while the import value of high-end machine tools is still high. Under the circumstances that the overall market demand of the industry is low, machine tool companies are undergoing transformation and upgrading under the impetus of the market, while the mid-range market is the hot spot of competition. The difficult conditions of slowing demand, overcapacity, rising costs, and falling prices are unlikely to improve significantly in the short term. Although the industry has strengthened its efforts and made some progress in terms of structural adjustment, promotion of upgrading, and strong management, the profit rate has yet to reverse the decline. This grim reality warns us that the pace of industrial transformation and upgrading must also be accelerated and efforts must be made to increase production efficiency and reduce resource consumption.
It is expected that the machinery industry will continue to maintain a relatively stable and relatively low growth trend in the coming years. It is expected that the growth rate of production and sales will be roughly 10% to 15%, the profit growth will be roughly 10%, and the increase in export earnings will be estimated at 5% to 10%. %.
Not only is the domestic scale company putting the market's focus on here, but some newly-entry industry upstarts have also targeted the breakthrough here. After all, mid-range machines are more likely to form batches and scale. At the same time, foreign brands have also accelerated the layout of the Chinese market.
Wilfried Schaefe, executive director of the German Machine Tool Manufacturers Association, said that China is an important German exporter and accounted for nearly 30% of German exports in 2012. According to the data, the value of the German machine tool industry in the past year was approximately 8.3 billion euros, of which more than 2.4 billion euros were orders from China.
Although the export value of the German machine tool industry fell by 3% in the first half of this year, the value of exports to China increased by 6% or 27% of the total, making the German machine tool industry pay more attention to maintaining its market share in the Chinese market. With the development of Chinese machine tool companies, German companies face strong competition from Chinese companies in the mid-end product market. Because the gap between the two countries' technological levels is relatively small in this area, the services provided by Chinese companies to customers are better.