Round Open Water Cooling Tower The whole structure is solid and light;the body and water pond is manufactured with reinforced glass fibre (FRP glass fiber reinforced plastics),never being corrosive. The surface finish is added with ultraviolet inhibitor,which can resist sunshine attack and damage.
Apply special design PVC water block curtain (water-stop) to prevents plashing) remarkably; pressure drop loss is slight and splashing loss i under 0.001%.
Apply cellular vacuum molding heat dissipation material, stagger arrangement surface has grooves and the heat exchange effect is especially good.
Round Open Water Cooling Tower,Water Cooling Tower,Round Cooling Tower,Cool Water Towers Wuxi Ark Fluid Science Technology Co., Ltd. , https://www.fangzhouarkfluid.com
Capsicum drying process: 1. The moisture content of the pepper raw material is very high, generally 75% to 85%. The pepper should be dried to 50% moisture content and sweated, followed by the second drying; Dry temperature can be adjusted at 60 to 80 °C; 3, using segmented drying method, segmented drying is a superior method for drying peppers. The use of segmented drying has a great influence on the quality of the pepper, drying time and drying amount. Peppers have obvious softening and swelling during the drying process. The dried capsicum has the same color, rosy and smooth, and the water content is balanced. If the water content of the pepper is about 80%, a large amount of water will be released and discharged during drying, which will directly affect the appearance of the dried pepper. Therefore, we must pay attention to strengthen ventilation and moisture management, so that peppers maintain a stable and appropriate water loss rate. Ventilation and dehumidification control is based on the dry-wet temperature difference. Generally, the wet bulb temperature is maintained at 38 to 39 ° C, and the temperature difference is maintained above 6 ° C (excluding 6 ° C).
With the continuous improvement of people's living standards and changes in consumption habits, more and more people eat peppers, and the demand for peppers is also growing. Guizhou Yuqing and pepper have long been inseparable. Everyday meals are inseparable from peppers, and the red peppers bring a flaming day to Yuqing farmers. Peppers are not only popular in the province, but also favored by merchants all over the country.
The unique exhaust heat recovery design of the large pepper dryer: reduce the heat loss of the discharge, and the comprehensive energy saving is better; the advanced fresh air pre-dehumidification function can ensure the fresh air drying and is suitable for the strict drying process. Pepper is one of the world's economic crops with good development prospects. For a long time, as the world's pepper production is mainly used as a condiment and vegetable consumption, and the people who are traditionally planted in peppers and low-temperature and humid areas are the main consumers, their production and consumption are developing slowly.
Large-scale pepper dryer is an environmentally-friendly and energy-saving drying equipment. It does not produce any harmful substances during the drying process. There is no smoke or open flame in the drying process. The temperature and humidity can be adjusted according to the characteristics of the drying materials. High degree of intelligence. 1, can achieve low temperature air closed cycle drying, material drying quality is good. By controlling the working condition of the device, the temperature of the hot dry air in the drying chamber is between 20 and 80 ° C, which can meet the high quality drying requirements of most heat sensitive materials; the closed cycle of the drying medium can avoid exchange with the outside air. It may contaminate the impurities of the material, which is especially important for food, medicine or biological products. In addition, when the material is sensitive to oxygen in the air, an inert medium can be used instead of air as a drying medium to achieve oxygen-free drying. 2, energy efficient. The heat of the heated air in the large-scale pepper dryer mainly comes from the sensible heat and latent heat contained in the warm and humid air discharged from the drying chamber. The energy input needs only the power consumption of the heat pump compressor, and the heat pump consumes a small amount of work. The advantage of a large amount of heat is obtained, so the heat pump drying device (the amount of water in the wet material consumed by the unit energy consumption) is usually 1.0 to 4.0 kg/kwh, and the smer value of the conventional convection dryer is about 0.2 to 0.6 kg/kwh. The environmentally-friendly large-scale pepper dryer is especially suitable for drying peppers. The large-scale pepper dryer can achieve precise temperature control, easy operation, no pollution to the environment and materials, and it uses air heat to save energy compared with other equipment.
All steel and iron material is processed through galvanizing by dipping,Ocorrosion resisting and durable.
Special designed axial-flow type air blower applies belt reduction gear,reducing low noise and sufficient wind; tailor-made water-drop noise
reduction carpet to eliminate water sound.
Water pond applies slant design, easy to wash, containing less water; the operating weight is lower, but the water tank is very big, so it won't absorb air.
The cooling tower support is light and solid, convenient to assembly no matter there is suspension iron rack or not.
Sichuan large pepper dryer equipment installation completed officially put into operation
The installation of Sichuan large-scale pepper dryer equipment was officially put into operation. Gongyi Jinhua Machinery Manufacturing Co., Ltd. is a joint-stock enterprise mainly engaged in the production of drying and drying equipment, integrating scientific research, production and sales. The company is located in Gongyi City between Zhengzhou City, the capital of Henan Province and Luoyang City, the ancient capital of the nine dynasties. The company was founded in 1963. After decades of research, development and manufacturing, the equipment produced by our factory has reasonable design, convenient operation and high efficiency. The advantages of energy saving, especially the unique research on the dryer, the company can provide users with project design, process design, standard and non-standard product design and production. The drying quality is good and the appearance is beautiful. The new pepper solution is a gentle drying method. Natural drying is the evaporation speed of the surface moisture of the pepper and the migration speed of the internal moisture to the surface, ensuring the quality of the pepper after drying. Good color. The drying parameters are easy to control and the adjustable range is wide. During the drying process of the pepper, the temperature and humidity of the air circulation can be accurately and effectively controlled, and the temperature adjustment range is from normal temperature to 85 ° C, and the relative humidity adjustment range is 15% to 85%. It can adapt to the drying of many different products.