Rescue boat is made from fiber reinforced plastic (FRP), between its inner hull and outer hull is filled with polyurethane foams to offer sufficient buoyancy. If damages occur to the boatbody under water, the buoyant hull can still provide sufficient buoyancy to enable the boat to sail safety on the water surface. Teel handrails are installed on both sides of the boat for occupants. Self- discharging deck ensures quick discharge of water in the boat. rescue boat is equipped with self- right air- tank , which meets the requirements for use on board of the RORO vessel,which is according to the latest regulations of SOLAS and international standards to design and build.  Rescue boat feature: 1. Comply with the requirmrns and rules of SOLAS and amendment 1996, LSA Code, MSC.218(82), MSC.272(85), MSC.320(89)& MSC.81(70) , MSC.226(82), MSC274(85), MSC321(89); 2. Boat body material: fire- pretended type FRP; 3. Fit the self-righting device. It can self-righting by itself when capsized; 4. Fit the off-load release mechanism with the safety pin; 5. Equipment is equipped according to SOLAS requirment; 6. The surface for walking is the antiskid; 7. Equip a manual pump remove the ponding in the boat; 8. Rubber fender is fitted around the boat; 9. The deck can self-motion drainage; 10. Running time of rescue boat when full-loaded & full-speed is more than 4 hours. The rescue boat is fitted with oil-resistant foam fender with fastening rubber outside. The handrails are arranged for each side of the boat for passenger embarkation.
A carbon Steel Plate has usually been considered as the steel that does not contain much alloy steel elements, also named as mild steel. Generally, elements are C, Mn, P, S, Si, besides these, there are no minimum limits for elements of Al, Cr, Ni, Mo, V, etc.
Carbon steel plates are available in different grades depending on the carbon content and strength.
As the content of Carbon increase, the steel plate hardness increases.
Low carbon steel plate: For carbon content 0.06% to 0.25%, also we call it Mild Steel Plate.
Medium carbon steel plate: C content from 0.25% to 0.55%.
High carbon steel plate: 0.55% to 1.0%, also called hard steel plate.
Low carbon steel is the most common form, and it's very malleable and ductile. Medium carbon steel balances ductility as well as strength for excellent wear resistance. High carbon steel is exceptionally strong, while ultra-high carbon steel can be tempered to even greater hardness but no malleability.
As the percentage of carbon gets larger, steel can become harder and stronger through heat-treating. Carbon steel is usually heated to change the mechanical properties of steel, usually ductility, hardness, strength, and resistance of impact. Increasing the carbon content of carbon steel makes it harder and stronger, but reduces the steel`s ability to be welded, making it more brittle.
Carbon steel plate is most often used for structural purposes such as buildings, yet it has the flexibility to be worked into ornate designs. Low carbon steel sheet (wrought iron) is typically used for fences, chain links, gates, and railings. Structural steel (medium carbon steel) is used in cars, refrigerators, washing machines, buildings, and bridges. The steel sheets are normally made up of medium carbon steel.
Carbon Steel Plate,Carbon Steel Sheet Plate,Low Carbon Steel Plate Shandong Guanzhou Iron and Steel Group Co., Ltd , https://www.shansteelsupply.com
The open type rescue boat is manufactured with compliance with the «amendments to the SALAS , 1974», MSC218. (82)MSC226. (82), MSC272. (85) and MSC274.(85).The hull of lifeboat is made of the fire reinforced plastic(F.R.P) .The space between the inside and outside hull is filled with polyurethane foam which will supply sufficient buoyancy for the boat. The boat will be afloat with the help of the foam even the part of boat underneath the water damaged . The boat will be self-righted when the boat turn over to any angle. This type of boat is used for the rescue on the sea.
Life boat davit:
Â
Name
Data
Length of Hull
6.00m
Width of Hull
2.30m
Depth of Hull
0.87m
Occupants (82.5KG per person)
7 Persons
Speed (3 persons )
>20 Knots
Boat Weight(light)Include with engine,fuel and equipment
1225KG
Boat Weight(fully loaded)
1968KG
Power of gasoline outboard engine
90HP
Diameter of Propeller
300MM
Capacity of Fuel oil tank
100L
Material of Propeller guard
SUS.
Â
The self-bailing deck design makes quick water exhaust.
The self-righting device is installed for fast rescue boat,
Which meet with requirement for use on board the RORO vessel.LSA code and MSC/CIR 809 regulation.
Product Range: We are specialized in all marine equipments and technique solution, that means we could offer you all marine equipments and accessories.
Product Design: We have big strong engineer team, for all marine products, we will design drawings according to ur requirements, or check the drawings you give us, all productions must be start after drawings confirmation.
Product Process: all produt flow are finished in our manufacture bases, so the quality and delivery timeÂ
could keep the same good, also avoid some details mistake.
Product Inspection: We have ISO certificate, and general products, we will provide Mill Certificate, also, weÂ
could provide ABS, BV, CCS, DNV, GL, LR, KR, NK, RINA, RS certificate, and we accept third party inspection, such as SGS etc. our clients also could come to visit our factor.
Any Inquiry or Questions, Please Kindly Contact Us!
Â
FRP Certificate Fast Rescue Boat 6 Meters Length with The Equivalent Crane
Model NO.: 14
Color: Orange
Standard: Solas Standard
Feature: Light Weight
Trademark: OEM
Transport Package: Standard Export Package
Specification: 6.50M*2.32M*1.15M
Origin: China
HS Code: 8906901000
Â
Factory: