In recent years, we have seen the rapid development of science and technology in our great motherland. This made me feel extremely proud for me as a Chinese. With the advancement of technology and the progress of people, we will join the Chinese cutting machine trading network to make progress together. Join the hotline, we look forward to your call. Details:/ Glue For Assembly is used for all kinds of assembly in wood crafts, such as: gluing of 45° angle parts, splicing, cold-pressed skin, cold-pressed fireproof board, etc. It is a high-grade woodworking adhesive.
High Toughness Assembly Adhesive is a quick-drying one-component water-based adhesive for assembly and finger jointing of wood and MDF. Bonding of flexible veneer and wood-based panels. High bond strength can be achieved even with a 45° angle invisible bond. The modified rubber has good wet viscosity, flexibility, heat resistance, water resistance, freeze-thaw stability and low temperature film formation. Suitable for use in a variety of climates.
Assembly Glue,Wood Glue For Cabinet Doors,Wood Furniture Adhesive,Epoxy Glue Lowes GUANGZHOU INTERNET WOOD GLUE MANUFACTURER CO. LTD. , https://www.hotmeltadhesiveiwg.com
When the spark generator cannot automatically cut off the arc plasma cutting machine, it is necessary to ignite the plasma arc first, and the high-frequency oscillator excites the gas between the electrode and the inner wall of the nozzle to generate a high-frequency discharge, so that the gas is partially ionized to form a small arc. This small arc is subjected to compressed air and is ejected from the nozzle to ignite the arc, which is the main task of the spark generator. Under normal circumstances, the spark generator's working time is only 0.5 ~ 1s, the reason can not automatically break the arc is generally to control the circuit board components misalignment, spark generator discharge electrode gap is not appropriate.
Solution: The spark generator discharge electrode should be inspected frequently to keep its surface flat, and the discharge electrode gap (0.8~1.2mm) of the spark generator should be timely adjusted. If necessary, replace the control board.
In addition to the above reasons, the cutting speed is too slow, the perpendicularity of the cutting torch and the workpiece when cutting, and the operator's familiarity with the plasma cutting machine, the operating level, etc., all affect the stability of the plasma arc, users should be in these areas note.
[I can't think of it. I can't do it. Change your style from now on. Opening the Chinese cutting machine trading network is equivalent to opening up your wealth road, come and click on the website now! 】
Editor: zgqgjjyw
