During the dog days, the hot summer weather not only afflicted you, but also tested your car. Like cars and people, cars are prone to failure in the face of high temperatures, and the "opening of the pot" is more common as a "car hot weather." For some old vehicles, “opening pans†can sometimes be unavoidable. Once the pan is opened, how should we deal with it to minimize losses? There are many reasons causing the car to boil, mainly due to: 1. The impact of hot weather. 2, air conditioning overload operation and heat component failure. 3, automotive cooling system failures, such as water tank leakage, lack of coolant, coolant deterioration, coolant circulation system blockage and so on. Solution: Stop now, wait for rescue 2. When it comes to car "open pan," many drivers are no strangers and have seen it more or less. But when it comes to how to do after the car is boiled, I believe many people will not know. In fact, during the driving process, if the driver finds that the water temperature of the car is very high (to the red line of the water temperature table) or the engine emits white smoke, the first thing to do is to immediately stop by the side and open the double flash. Then see if the vehicle is driving at a low speed or driving at a high speed, because the treatment after “opening the pot†is not the same in both cases. If you are driving at slow speed, it is the right way to immediately stop by the side, turn off the engine, and open the engine cover to open heat, and then call the 4S store to wait for rescue. If the engine is running at a high speed before the pot is opened, the correct way is to first stop the car and then let the car engine run at idle for a period of time. Remember not to immediately shut down the engine. Because the engine is in a high-speed operation before the “opening panâ€, the large amount of heat generated by the engine has not yet been emitted. If the flame is turned off at this time, the cooling water in the radiator will not work and the temperature in the engine will soar. Therefore, in this case, the car should be allowed to idle at the side of the road for a while and then turn off. At the same time, the engine compartment lid is opened to wait for rescue. Some people may ask: "I won't stop after the car is open?" The answer is no. Because the problem of the engine is very high after the car is “openedâ€, if the owner can't immediately take timely and effective measures to cool down, it is easy to make the engine burst, resulting in great losses. In serious cases, the car can be scrapped by itself. Now. So, after the car "opens the pot", please immediately stop by. 2. Emergency maintenance After the car "opens the pot", the best way is certainly to wait for 4S shop rescue. However, if the car is in the suburbs and the maintenance factory does not want to come over, the driver can only try some emergency measures by himself. First of all, look at the car is not depleted, the radiator is not dirty, if you can then sprinkle the water on the radiator, cooling the radiator. However, it should be noted that the water must not be poured on the engine, otherwise the surface of the engine may be deformed due to local cooling. If determined, then touch the upper and lower water pipes of the tank and feel the temperature difference. If the temperature difference is large, it indicates that the thermostat is faulty. At this time, you can only see the driver's hands-on ability, remove the thermostat, the car may be able to handle low-load driving. Can not be removed, you can only wait for the engine to cool naturally. For drivers with strong hands-on skills, you can also consider recharging the cooling system yourself. But be sure not to stop immediately after opening the tank cover and add water, because at this time the water temperature in the tank is very high and the pressure is also very large. Immediately opening it may cause high-temperature steam to blow out, causing an accident. It is best to wait for a period of time before opening the lid of the tank. It is advisable to place a towel to prevent water vapor from scalding the arm. Conclusion: Although the “open pan†of automobiles is a “common diseaseâ€, it can be avoided if the owner of the car can prevent it. For example, make seasonal maintenance during the season. Before leaving the car every day, check whether the water tank is short of water. If you find water shortage, you should fill it up in time. Always watch the water temperature gauge while driving. Once you find that the water temperature is too high, it is best to choose to take a rest and rest. In addition, in high-temperature weather, if you encounter a big traffic jam, the owner will try to turn off the air-conditioning as soon as possible to reduce the rate of increase in water temperature and prevent “open potâ€.
This kind of mold is the tool for making Li-ion battery electrodes and separator pieces ,i.e.shaped anode .cathode.separator . this kind of mold need to be highly precise(notch burr less than 0.005mm) with long life duration (more 10million cutting cycles)due to the next products they are responsible to make .
Electrodes Cutting Mold,Electrodes Punching Die,Pole Piece Cutting Die,Electrodes Stamping Die Guangdong Rixin Precision Technology Co., Ltd. , https://www.nissontooling.com