The trends of the Metal Scrap recycling industry
By baling the products, the volume of metal scrap is greatly reduced, often up to seventy-five per cent.
Y81 series hydraulic metal baler mainly include the following models.
Y81F (side turn discharge ), Y81T (side push discharge), Y81Q (front push discharge) and Y81S (Double main press ).
Y81F-Manual operation (Side turn discharge )
Y81F-Semi-automatic operation (Side turn discharge )
Y81T-Semi-automatic operation (Side push discharge )
Y81S-Semi-automatic operation (Double main press discharge )
We provide a variety of models of the hydraulic metal baler, With new technologies to raise the quality and reduce the price, which supports 24 hours fully automatic working environment.
CONTACT YMSRECYCLING
Manual Metal Baler,Manual Waste Metal Baler,Manual Metal Baling Press,Manual Metal Recycling Baler Jiangyin Yimaisheng Hydraulic Machinery Co., Ltd. , https://www.ymsrecycling.com
Basic information
Twin Screw Extruder of Series TSE is designed with two co-rotating screw-shafts. Raw materials are perfectly to be dispersed and distributed at thermo-melting status by precise kneading-elements with high speed in the barrel. Twin Screw Extruder is a very important equipment for powder coatings processing.
Principle
After the materials into the hopper, materials are uniformly feeding into the screw barrel of extruder though the feed screw , and then by syntropy high speed rotation of a pair of screw to transport material to extrude and melting mix, which the multi-component materials achieving the best distribution and dispersion effect in the thermal conditions.
Features
1. Screw segments and kneading blocks are designed and manufactured to be uniform clearance between two screw-shafts during operation by 3D-CAD&CAM. Self-wiping and no solidified particle.
2. Screw segments and kneading blocks on screw-shafts could be configured optimally according to technology requirements of powder coating processing.
3. Screw segments, kneading blocks, liners and shafts are made of high-quality alloy steel with heat-treatment and precise processing. Excellent performance, and long lifetime.
4. The barrel is designed with efficient heating/cooling system. Multiple temperature zones are precisely controlled within ±2ºC.
5. Gear box is designed with high-torque, low-noise, centralized lubricating and oil temperature control/alarm system.
6. Feeding system is designed with metering screw and anti-lag device. Homogeneous and accurate feeding. Metal separator is optional.
7. PLC and HMI are used for control with friendly interaction, easy to operate.
8.All processing parameters are recipe-mode managed (data storage, recall and modify).
9.Comprehensive safety protection system.
10.Easy clean and maintenance.
Basic information
Twin Screw Extruder of Series TSE is designed with two co-rotating screw-shafts. Raw materials are perfectly to be dispersed and distributed at thermo-melting status by precise kneading-elements with high speed in the barrel. Twin Screw Extruder is a very important equipment for powder coatings processing.
Principle
After the materials into the hopper, materials are uniformly feeding into the screw barrel of extruder though the feed screw , and then by syntropy high speed rotation of a pair of screw to transport material to extrude and melting mix, which the multi-component materials achieving the best distribution and dispersion effect in the thermal conditions.
Features
1. Screw segments and kneading blocks are designed and manufactured to be uniform clearance between two screw-shafts during operation by 3D-CAD&CAM. Self-wiping and no solidified particle.
2. Screw segments and kneading blocks on screw-shafts could be configured optimally according to technology requirements of powder coating processing.
3. Screw segments, kneading blocks, liners and shafts are made of high-quality alloy steel with heat-treatment and precise processing. Excellent performance, and long lifetime.
4. The barrel is designed with efficient heating/cooling system. Multiple temperature zones are precisely controlled within ±2ºC.
5. Gear box is designed with high-torque, low-noise, centralized lubricating and oil temperature control/alarm system.
6. Feeding system is designed with metering screw and anti-lag device. Homogeneous and accurate feeding. Metal separator is optional.
7. PLC and HMI are used for control with friendly interaction, easy to operate.
8.All processing parameters are recipe-mode managed (data storage, recall and modify).
9.Comprehensive safety protection system.
10.Easy clean and maintenance.
Recycled scrap consists of 58% of post-consumer products that are considered to be obsolete or outdated. 24% of this material is prompt scrap, which is produced in manufacturing plants that create steel. 18% of the industry involves home scrap, which is produced by current operations.
Steel and aluminum can be infinitely recycled. Scrap metal consists of ferrous metals or nonferrous metals. Large items such as cars, dishwashers, washing machines, stoves, and refrigerators are generally created from metal and therefore the best items to recycle.
By reducing the volume in this way, the smelting costs are reduced. In addition, the overall process of recycling and re-casting can be done more quickly.
Manual Metal balers are economically and environmentally beneficial in reducing metal waste. They lower costs, are space-efficient and make transporting the materials much easier.
The Manual Metal Baling press makes your metal recycling more efficient and profitable.
The Y81 series Manual Waste Metal Scrap Baler could not only press all non-ferrous metals such as copper, brass, and aluminium can be recycled as well as ferrous metals from steel to stainless steel, with various sizes for option, high-density compression, compact and strong. Low energy consumption but fast production rate.
We also support the design and manufacture of other model versions upon request.
Y81Q-Manual operation (Front push discharge )
YMSRECYCLING offer economical and effective solutions to help you to process different metal scraps.
The Metal Baling Press can be customized and extended according to the actual needs of your on-site.
Call us now on +86-15950122559
To start maximising your returns from your metal scrap recycling.
Please email sales@ymsrecycling.com or visit our website directly for further information about the products you are interested in.
Maple Tse Twin-Screw Extruder for Powder Coating
Model NO.: TSE-48A
Installation: Desktop
Driven Type: Electric
Trademark: MPM tek
Transport Package: Wooden Packaging Box or Iron Packaging Box
Specification: CE
Origin: Yantai, China
HS Code: 8477209000
Model NO.: TSE-48A
Installation: Desktop
Driven Type: Electric
Trademark: MPM tek
Transport Package: Wooden Packaging Box or Iron Packaging Box
Specification: CE
Origin: Yantai, China
HS Code: 8477209000