Cars are our means of transport. Many families have their own car. As more and more cars cause some roads to sink, they will cause water in the area of ​​rainy roads. Some vehicles accidentally drive the car to a place where the water is deep in the road area and cause the vehicle to turn off. What should I do if the water is turned off? Car wading can be extinguished due to water entering the short circuit. Generally speaking, when the vehicle is driving to areas where there is water, it must pass at low speed. However, when it is appropriate, it is necessary to increase the speed and drive away from the place where there is water as soon as possible. If stagnant water exceeds the edge of the bumper, it will not pass. If the water is forced to pass, the water will irritate the water when the vehicle is driven, and the water can easily enter the vehicle. Because the water is not something so it can not be compressed, if you enter the car is still driving, the consequences can be disastrous, it will lead to some parts of the car damaged and cause the vehicle to turn off. In another situation, the speed at which the car travels to the water will slow down and the water will enter the car, causing the vehicle to stall. Therefore, at this time, do not start anymore. Call the towing trailer and do not force it. If you force it, it will make the whole vehicle worse. If the car is in the water when it is not driving, how can we solve it? First check the water height is not high, if the water depth is about half the height of the car, then there should be no water in the car, you can wait until the water is gone, the car to the repair shop, vehicle maintenance. If the water is submerged in the water, it means that the water is going in. If this is the case, do not start it. After the water is gone, the car will be sent to the repair shop for repair. Through the above introduction I believe we must have some understanding. It is not a trivial matter to turn off the water, so everyone must be careful when driving. Especially when driving on rainy days, you must slow down. If you are too deep in the road area, you must drive around. Information in this regard is not to be confused when it is encountered.
Round Perforated Screen Mesh is a type of Vibrating Screen Mesh, it has the least open area, sometimes it is the best choice when blinding always occure or need very accurately materials. Round perforated plate is suitable for anthracite, bituminous coal, metallic ore and other places. Its hole sizes can be from 0.4mm to 120mm.
Round perforated screen mesh material: Q235, stainless steel plate
Hole shape: Round hole, square hole, hexagonal hole.
punch plate features:
Accurate dimension
punching hole mesh applications:
Engineering industries Sugar Industries
Food Processing Acoustic insulation
Building Oil refineries
Agricultural sector Rice mills
Nuclear Power Plants Furniture
Petro Chemical industries Rubber Industries
Flour mills
Round perforated screen mesh specifications:
Length: up to 3 meter Round Perforated Screen Mesh Round Perforated Screen Mesh,Perforated Metal Vibrating Screen,Middle Weight Perforated Metal,Heavy Weight Perforated Metal Mesh Anping HUAHAIYUAN WIRE MESH CO.,LTD , https://www.crusherscreenmesh.com
Smooth finish
Rust proof
Thickness size: 1 mm to 20 mm
Width: up to 1.5meter
Hole size: 2 mm to 75 mm